Product Description
The two-stage bottomless crusher can crush and pulverize different materials such as coal gangue, shale, cinder,limestone, construction waste and so on.
Because there is no scicen bottom at the bottom, the moisture of the material has no effect on the machine,the discharge does not block the raw material and can crush a variety of stones at the same time.
| Type |
Hourly output(t/h) |
Motor power |
| 400*400 |
5-7 |
11w+11w |
| 600*400 |
10-15 |
18.5w+18.5w |
| 600*600 |
15-20 |
22w+22w |
| 600*800 |
20-30 |
22w+30w |
| 800*600 |
30-40 |
37w+45w |
| 800*800 |
40-50 |
45w+55w |
In terms of packing, we first use plastic wrap to wrap around the machine and then packing wooden cases outside to prevent. Collision during transportation shut up.
Feature:
1. The upper and lower two levels of crushing, two sets of rotors connected with each other, so that the hammer of the upper rotor is broken by the hammer of the lower rotor is immediately broken again by the rapid rotation, the inner cavity material reverse collision with each other at high speed, When the fan broken each other, to achieve the crushing effect.
2. Unique bidirectional gap adjustment technology, the gap between the hammer wear and the lining plate becomes larger and coarse, can be moved from the center outward to reduce the position of the hammer and the gap between the lining plate to continue to use, can also be pushed from outside to inside the lining plate to adjust the gap, their own control of the discharge size.
3. There is no grate bottom in the design, there is no strict requirement on the moisture content of the material, there is no problem of paste blocking the sieve plate, there is no
problem of fine powder can not be discharged in time, repeated crushing, powder high efficiency, there is no invalid wear phenomenon of hammer head.
4. Smooth operation, large inertia, the upper and lower two sets of rotor shaft end are equipped with flywheel, flywheel can adjust the periodic speed fluctuation of operation
make the operation uniform and stable, increase rotational inertia, overcome movement resistance, can save more than 20% of electricity.
5. Suitable for brittle materials, not blocked, less dust, low noise.
6. Shorten the retention time of the material in the crushing chamber, improve the service life of wearing parts.
7. Convenient installation, greatly improve the freedom of the equipment.
8. Quick maintenance, the upper side doors of the crusher can be opened freely, which makes the maintenance of the crusher and the replacement of wearing parts faster and
more convenient, and shortens the maintenance time.
){kind=link}
){kind=link}